Freely configurable digital universal controller for the management, monitoring and regulation of ventilation systems, air conditioning and refrigeration with communication on PICnet bus. All automation functions are available in the basic software of the controller in the form of pre-programmed applications with typical systems and can be activated and modified via the user interface software, following a simple configuration path. The controller can be configured to regulate ventilation and air conditioning systems, chilled water production and universal applications such as pressure control, air speed and quality, etc.
In the controller there are 5 different applications plus an empty one that can be freely configured by the user in order to completely adapt to the needs of the individual system. Through the use of additional modules it is possible to implement additional inputs and outputs that communicate with each other through the PICnet bus.
P ‚PI‚ PID regulation functions
regulation outputs for analog (0-10V) and binary (2 points) type actuators
hourly schedules, weekly and holiday periods
energy optimization (free cooling, enthalpy comparison)
engine control blocks for the management of single and / or twin users
sequential control of motors, pumps, fans and cooling units
alarm functions with or without delay on activation and acquired via the user interface
acquisition and modification of all data coming from the field
diagnostic functions, logic functions and trend functions with event recording
The PICnet system allows to identify the most suitable solution for optimal management whatever the temperature control system adopted,. The system manages any source of heating and air conditioning in an extremely simple and remote way, via PC, tablet or smartphone.
In the case of radiators, floor systems or fan-coils, the PICnet modules have relay outputs to control the zone valve or the convector speeds and are available for the main civil series.
In the case of radiant cooling systems, the use of the temperature and humidity probe prevents the formation of condensation on the floor. In the case of direct expansion (split) air conditioning systems, the PICnet system communicates directly with the external unit, typically via the MODBUS protocol, to allow integration.
For those systems that do not have a control terminal block or signals suitable for centralized management on the outdoor unit, the system will instead be managed through communication with the indoor units, through PICnet modules that have an infrared transmitter with high emission power.
Thanks to a patented technology, the PICnet modules are in fact able to fully reproduce the commands available from the remote control, not just replicating predefined set points, thus guaranteeing full remote control of the unit, through centralized supervision.
Throughout its history Sinthesi has developed PICnet integrations with the most popular brands and models of air conditioning systems, such as Daikin, Fujitsu, LG, Mitsubishi, Panasonic, Sharp, Toshiba and many others.
independent regulation of heating circuit and circuit for domestic hot water
control of the boiler temperature by controlling a one-stage burner
automatic ECO energy saving function with deactivation of the heating system according to the outside temperature
alow temperature compensation with or without room authority
Simultaneous control of the boiler temperature, the flow temperature of the heating circuits and the domestic hot water circuit.
daily / weekly hourly programming with 3 comfort periods per day
frost protection for pipes and environments with periodic pump control
remote control via remote room unit
max flow / boiler temperature limit
climatic compensation with regulation curve broken into 4 points for easy setting
domestic hot water production control with ON / OFF control of a loading pump or a diverter valve (winter) or control of an electric immersion coil (summer)
possibility of priority over operation of the domestic hot water loading pump and boiler pump
domestic hot water set point settings, maximum flow temperature limit, integrated anti-legionella function, dedicated hourly programming for A.C.S., minimum return temperature limit for boiler anti-condensation control
data-logger function for recording temperatures